VYPR
Get started
← All vendors
Vendor

Linux Foundation

Sign in to watch

The Linux Foundation (LF) is a non-profit organization established in 2000 to support Linux development and open-source software projects.

Founded 2007
Products
20
CVEs
46
Across products
267
Status
Private

Products

20

Recent CVEs

46
CVESevRiskCVSSEPSSKEVPublishedDescription
CVE-2026-32613Cri0.649.90.00Apr 20, 2026Spinnaker is an open source, multi-cloud continuous delivery platform. Echo like some other services, uses SPeL (Spring Expression Language) to process information - specifically around expected artifacts. In versions prior to 2026.1.0, 2026.0.1, 2025.4.2, and 2025.3.2, unlike orca, it was NOT restricting that context to a set of trusted classes, but allowing FULL JVM access. This enabled a user to use arbitrary java classes which allow deep access to the system. This enabled the ability to invoke commands, access files, etc. Versions 2026.1.0, 2026.0.1, 2025.4.2, and 2025.3.2 contain a patch. As a workaround, disable echo entirely.
CVE-2026-32604Cri0.649.90.00Apr 20, 2026Spinnaker is an open source, multi-cloud continuous delivery platform. In versions prior to 2026.1.0, 2026.0.1, 2025.4.2, and 2025.3.2, a bad actor can execute arbitrary commands very simply on the clouddriver pods. This can expose credentials, remove files, or inject resources easily. Versions 2026.1.0, 2026.0.1, 2025.4.2, and 2025.3.2 contain a patch. As a workaround, disable the gitrepo artifact types.
CVE-2026-35171Cri0.649.80.00Apr 6, 2026Kedro is a toolbox for production-ready data science. Prior to 1.3.0, Kedro allows the logging configuration file path to be set via the KEDRO_LOGGING_CONFIG environment variable and loads it without validation. The logging configuration schema supports the special () key, which enables arbitrary callable instantiation. An attacker can exploit this to execute arbitrary system commands during application startup. This is a critical remote code execution (RCE) vulnerability caused by unsafe use of logging.config.dictConfig() with user-controlled input. This vulnerability is fixed in 1.3.0.
CVE-2010-5325Cri0.649.80.06Apr 15, 2016Heap-based buffer overflow in the unhtmlify function in foomatic-rip in foomatic-filters before 4.0.6 allows remote attackers to cause a denial of service (memory corruption and crash) or possibly execute arbitrary code via a long job title.
CVE-2026-27816Cri0.599.10.00Mar 26, 2026EVerest is an EV charging software stack. Prior to versions to 2026.02.0, ISO15118_chargerImpl::handle_update_energy_transfer_modes copies a variable-length list into a fixed-size array of length 6 without bounds checking. With schema validation disabled by default, oversized MQTT Cmd payloads can trigger out-of-bounds writes and corrupt adjacent EVSE state or crash the process. Version 2026.02.0 contains a patch.
CVE-2026-27815Cri0.599.10.00Mar 26, 2026EVerest is an EV charging software stack. Prior to versions to 2026.02.0, ISO15118_chargerImpl::handle_session_setup copies a variable-length payment_options list into a fixed-size array of length 2 without bounds checking. With schema validation disabled by default, oversized MQTT Cmd payloads can trigger out-of-bounds writes and corrupt adjacent EVSE state or crash the process. Version 2026.02.0 contains a patch.
CVE-2026-33701Cri0.579.80.00Mar 27, 2026OpenTelemetry Java Instrumentation provides OpenTelemetry auto-instrumentation and instrumentation libraries for Java. In versions prior to 2.26.1, the RMI instrumentation registered a custom endpoint that deserialized incoming data without applying serialization filters. On JDK version 16 and earlier, an attacker with network access to a JMX or RMI port on an instrumented JVM could exploit this to potentially achieve remote code execution. All three of the following conditions must be true to exploit this vulnerability: First, OpenTelemetry Java instrumentation is attached as a Java agent (`-javaagent`) on Java 16 or earlier. Second, JMX/RMI port has been explicitly configured via `-Dcom.sun.management.jmxremote.port` and is network-reachable. Third, gadget-chain-compatible library is present on the classpath. This results in arbitrary remote code execution with the privileges of the user running the instrumented JVM. For JDK >= 17, no action is required, but upgrading is strongly encouraged. For JDK < 17, upgrade to version 2.26.1 or later. As a workaround, set the system property `-Dotel.instrumentation.rmi.enabled=false` to disable the RMI integration.
CVE-2026-34045Hig0.538.20.00Apr 7, 2026Podman Desktop is a graphical tool for developing on containers and Kubernetes. Prior to 1.26.2, an unauthenticated HTTP server exposed by Podman Desktop allows any network attacker to remotely trigger denial-of-service conditions and extract sensitive information. By abusing missing connection limits and timeouts, an attacker can exhaust file descriptors and kernel memory, leading to application crash or full host freeze. Additionally, verbose error responses disclose internal paths and system details (including usernames on Windows), aiding further exploitation. The issue requires no authentication or user interaction and is exploitable over the network. This vulnerability is fixed in 1.26.2.
CVE-2026-40161Hig0.507.70.00Apr 21, 2026Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. From 1.0.0 to 1.10.0, the Tekton Pipelines git resolver in API mode sends the system-configured Git API token to a user-controlled serverURL when the user omits the token parameter. A tenant with TaskRun or PipelineRun create permission can exfiltrate the shared API token (GitHub PAT, GitLab token, etc.) by pointing serverURL to an attacker-controlled endpoint.
CVE-2026-40938Hig0.497.50.00Apr 21, 2026Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. From 1.0.0 to before 1.11.0, the git resolver's revision parameter is passed directly as a positional argument to git fetch without any validation that it does not begin with a - character. Because git parses flags from mixed positional arguments, an attacker can inject arbitrary git fetch flags such as --upload-pack=<binary>. Combined with the validateRepoURL function explicitly permitting URLs that begin with / (local filesystem paths), a tenant who can submit ResolutionRequest objects can chain these two behaviors to execute an arbitrary binary on the resolver pod. The tekton-pipelines-resolvers ServiceAccount holds cluster-wide get/list/watch on all Secrets, so code execution on the resolver pod enables full cluster-wide secret exfiltration. This vulnerability is fixed in 1.11.1.
CVE-2026-34445Hig0.498.60.00Apr 1, 2026Open Neural Network Exchange (ONNX) is an open standard for machine learning interoperability. Prior to version 1.21.0, the ExternalDataInfo class in ONNX was using Python’s setattr() function to load metadata (like file paths or data lengths) directly from an ONNX model file. It didn’t check if the "keys" in the file were valid. Due to this, an attacker could craft a malicious model that overwrites internal object properties. This issue has been patched in version 1.21.0.
CVE-2026-27828Hig0.497.50.00Mar 26, 2026EVerest is an EV charging software stack. Prior to version 2026.02.0, ISO15118_chargerImpl::handle_session_setup uses v2g_ctx after it has been freed when ISO15118 initialization fails (e.g., no IPv6 link-local address). The EVSE process can be crashed remotely by an attacker with MQTT access who issues a session_setup command while v2g_ctx has been released. Version 2026.02.0 contains a patch.
CVE-2026-37532Hig0.467.10.00May 1, 2026AGL agl-service-can-low-level thru 17.1.12 contains a heap buffer over-read in the isotp-c library. In isotp_continue_receive (receive.c:87-89), the payload_length for a Single Frame is extracted from a 4-bit nibble in the CAN frame data, yielding values 0-15. However, a standard CAN frame is only 8 bytes, with payload starting at data[1] (7 bytes available). When payload_length exceeds the available data (e.g., nibble=15 but only 7 payload bytes exist), memcpy(message.payload, &data[1], payload_length) reads up to 8 bytes past the end of the data buffer.
CVE-2026-35167Hig0.467.10.00Apr 6, 2026Kedro is a toolbox for production-ready data science. Prior to 1.3.0, the _get_versioned_path() method in kedro/io/core.py constructs filesystem paths by directly interpolating user-supplied version strings without sanitization. Because version strings are used as path components, traversal sequences such as ../ are preserved and can escape the intended versioned dataset directory. This is reachable through multiple entry points: catalog.load(..., version=...), DataCatalog.from_config(..., load_versions=...), and the CLI via kedro run --load-versions=dataset:../../../secrets. An attacker who can influence the version string can force Kedro to load files from outside the intended version directory, enabling unauthorized file reads, data poisoning, or cross-tenant data access in shared environments. This vulnerability is fixed in 1.3.0.
CVE-2026-24905Hig0.447.80.00Jan 29, 2026Inspektor Gadget is a set of tools and framework for data collection and system inspection on Kubernetes clusters and Linux hosts using eBPF. The `ig` binary provides a subcommand for image building, used to generate custom gadget OCI images. A part of this functionality is implemented in the file `inspektor-gadget/cmd/common/image/build.go`. The `Makefile.build` file is the Makefile template employed during the building process. This file includes user-controlled data in an unsafe fashion, specifically some parameters are embedded without an adequate escaping in the commands inside the Makefile. Prior to version 0.48.1, this implementation is vulnerable to command injection: an attacker able to control values in the `buildOptions` structure would be able to execute arbitrary commands during the building process. An attacker able to exploit this vulnerability would be able to execute arbitrary command on the Linux host where the `ig` command is launched, if images are built with the `--local` flag or on the build container invoked by `ig`, if the `--local` flag is not provided. The `buildOptions` structure is extracted from the YAML gadget manifest passed to the `ig image build` command. Therefore, the attacker would need a way to control either the full `build.yml` file passed to the `ig image build` command, or one of its options. Typically, this could happen in a CI/CD scenario that builds untrusted gadgets to verify correctness. Version 0.51.1 fixes the issue.
CVE-2016-3697Hig0.447.80.00Jun 1, 2016libcontainer/user/user.go in runC before 0.1.0, as used in Docker before 1.11.2, improperly treats a numeric UID as a potential username, which allows local users to gain privileges via a numeric username in the password file in a container.
CVE-2026-40924Med0.426.50.00Apr 21, 2026Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Prior to 1.11.1, the HTTP resolver's FetchHttpResource function calls io.ReadAll(resp.Body) with no response body size limit. Any tenant with permission to create TaskRuns or PipelineRuns that reference the HTTP resolver can point it at an attacker-controlled HTTP server that returns a very large response body within the 1-minute timeout window, causing the tekton-pipelines-resolvers pod to be OOM-killed by Kubernetes. Because all resolver types (Git, Hub, Bundle, Cluster, HTTP) run in the same pod, crashing this pod denies resolution service to the entire cluster. Repeated exploitation causes a sustained crash loop. The same vulnerable code path is reached by both the deprecated pkg/resolution/resolver/http and the current pkg/remoteresolution/resolver/http implementations. This vulnerability is fixed in 1.11.1.
CVE-2026-34992Hig0.427.50.00Apr 6, 2026Antrea is a Kubernetes networking solution intended to be Kubernetes native. Prior to 2.4.5 and 2.5.2, a missing encryption vulnerability affects inter-Node Pod traffic. In Antrea clusters configured for dual-stack networking with IPsec encryption enabled (trafficEncryptionMode: ipsec), Antrea fails to apply encryption for IPv6 Pod traffic. While the IPv4 traffic is correctly encrypted via ESP (Encapsulating Security Payload), traffic using IPv6 is transmitted in plaintext. This occurs because the packets are encapsulated (using Geneve or VXLAN) but bypass the IPsec encryption layer. Impacted Users: users with dual-stack clusters and IPsec encryption enabled. Single-stack IPv4 or IPv6 clusters are not affected. This vulnerability is fixed in 2.4.5 and 2.5.2.
CVE-2026-27489Hig0.427.50.00Apr 1, 2026Open Neural Network Exchange (ONNX) is an open standard for machine learning interoperability. Prior to version 1.21.0, a path traversal vulnerability via symlink allows to read arbitrary files outside model or user-provided directory. This issue has been patched in version 1.21.0.
CVE-2026-32236Hig0.427.50.00Mar 12, 2026Backstage is an open framework for building developer portals. Prior to 0.27.1, a Server-Side Request Forgery (SSRF) vulnerability exists in @backstage/plugin-auth-backend when auth.experimentalClientIdMetadataDocuments.enabled is set to true. The CIMD metadata fetch validates the initial client_id hostname against private IP ranges but does not apply the same validation after HTTP redirects. The practical impact is limited. The attacker cannot read the response body from the internal request, cannot control request headers or method, and the feature must be explicitly enabled via an experimental flag that is off by default. Deployments that restrict allowedClientIdPatterns to specific trusted domains are not affected. Patched in @backstage/plugin-auth-backend version 0.27.1.