Zephyr
Source repositories
CVEs (254)
| CVE | Vendor / Product | Sev | Risk | CVSS | EPSS | KEV | Published | Description |
|---|---|---|---|---|---|---|---|---|
| CVE-2026-78119 | Med | 0.34 | 6.3 | 0.00 | Oct 21, 2026 | The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words… | ||
| CVE-2026-18415 | Med | 0.34 | 6.3 | 0.00 | Sep 28, 2026 | ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set),… | ||
| CVE-2026-10635 | Med | 0.34 | 6.3 | 0.00 | Jun 16, 2026 | On Xtensa targets with CONFIG_USERSPACE and CONFIG_XTENSA_MMU, the page-table code (arch/xtensa/core/ptables.c) maintains a global list, xtensa_domain_list, of active memory domains using a list node embedded inside the caller-owned struct k_mem_domain. When a domain is… | ||
| CVE-2026-5066 | Med | 0.34 | 6.3 | 0.00 | Jun 4, 2026 | A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a… | ||
| CVE-2026-5589 | Med | 0.34 | 6.3 | 0.00 | Jun 4, 2026 | An integer underflow in bt_mesh_sol_recv() in the Bluetooth Mesh solicitation handling (subsys/bluetooth/mesh/solicitation.c) leads to an out-of-bounds write. When CONFIG_BT_MESH_OD_PRIV_PROXY_SRV is enabled, the function parses solicitation PDUs from raw BLE advertising… | ||
| CVE-2026-10663 | Med | 0.33 | 6.1 | 0.00 | Jul 12, 2026 | In Zephyr's experimental USB host stack (CONFIG_USB_HOST_STACK), usbh_device_disconnect() (subsys/usb/host/usbh_device.c) freed the root usb_device slab object without clearing the cached pointer ctx->root. The bus removal handler dev_removed_handler()… | ||
| CVE-2026-10648 | Med | 0.33 | 6.2 | 0.00 | Jun 29, 2026 | mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool… | ||
| CVE-2026-5071 | Med | 0.33 | 6.1 | 0.00 | May 30, 2026 | The SocketCAN implementation validates the length of a user-provided buffer containing a socketcan_frame object using only a NET_ASSERT statement in zcan_sendto_ctx() before dereferencing it in socketcan_to_can_frame(). In production builds where assertions are disabled, a… | ||
| CVE-2026-1681 | Med | 0.33 | 6.1 | 0.00 | May 12, 2026 | Issuing an ICMP ping via the `net ping` shell command to a device's own IPv4 address causes the network stack to recursively re-enter the input path on the same system work-queue stack. Because the destination is recognized as a local address, both the echo request and the… | ||
| CVE-2026-4179 | Med | 0.33 | 6.1 | 0.00 | Mar 16, 2026 | Issues in stm32 USB device driver (drivers/usb/device/usb_dc_stm32.c) can lead to an infinite while loop. | ||
| CVE-2020-10068 | Med | 0.33 | 5.1 | 0.01 | Jun 5, 2020 | In the Zephyr project Bluetooth subsystem, certain duplicate and back-to-back packets can cause incorrect behavior, resulting in a denial of service. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions. | ||
| CVE-2026-10645 | Med | 0.32 | 4.9 | 0.00 | Jun 23, 2026 | The Zephyr ext2 filesystem driver (subsys/fs/ext2) trusted the on-disk directory entry fields de_rec_len and de_name_len when walking a directory block. ext2_fetch_direntry() guarded only with de_name_len > EXT2_MAX_FILE_NAME, but de_name_len is a uint8_t and EXT2_MAX_FILE_NAME… | ||
| CVE-2021-3434 | Med | 0.32 | 4.9 | 0.00 | Jun 28, 2022 | Stack based buffer overflow in le_ecred_conn_req(). Zephyr versions >= v2.5.0 Stack-based Buffer Overflow (CWE-121). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-8w87-6rfp-cfrm | ||
| CVE-2026-75083 | Med | 0.31 | 5.9 | 0.00 | Oct 14, 2026 | The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr()… | ||
| CVE-2026-18746 | Med | 0.31 | 5.9 | 0.00 | Sep 29, 2026 | parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with… | ||
| CVE-2026-12365 | Med | 0.31 | 5.8 | 0.00 | Aug 14, 2026 | A use-after-free exists in the Zephyr second-generation work queue (kernel/work.c) in the handling of delayable work timeouts. When a delayable work item's timeout has been dequeued and its handler work_timeout() is in flight (blocked acquiring the work-queue spinlock), a… | ||
| CVE-2026-11894 | Med | 0.31 | 5.9 | 0.00 | Aug 11, 2026 | The Realtek BEE Bluetooth HCI driver's send callback, bt_hci_bee_send() in drivers/bluetooth/hci/hci_bee.c, violated the bt_hci_driver_api buffer-ownership contract. That contract requires the driver to consume (unref) the transmit net_buf only on success; on an error return the… | ||
| CVE-2026-11893 | Med | 0.31 | 5.9 | 0.00 | Aug 11, 2026 | The Bluetooth HCI driver for Bouffalo Lab on-chip BLE controllers (BL60x/BL70x/BL61x), bt_bflb_send() in drivers/bluetooth/hci/hci_bflb.c, violates the bt_hci_driver_api.send() buffer-ownership contract. That contract (documented at include/zephyr/drivers/bluetooth.h) requires… | ||
| CVE-2026-10686 | Med | 0.31 | 5.8 | 0.01 | Jul 31, 2026 | Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path… | ||
| CVE-2026-10638 | Med | 0.31 | 5.9 | 0.00 | Jun 16, 2026 | subsys/net/ip/icmpv6.c reads the network interface from a net_pkt after that packet has been handed to net_try_send_data(). In icmpv6_handle_echo_request() and net_icmpv6_send_error(), the post-send statistics update calls net_pkt_iface(reply)/net_pkt_iface(pkt) on the just-sent… |
- risk 0.34cvss 6.3epss 0.00
The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words…
- risk 0.34cvss 6.3epss 0.00
ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set),…
- risk 0.34cvss 6.3epss 0.00
On Xtensa targets with CONFIG_USERSPACE and CONFIG_XTENSA_MMU, the page-table code (arch/xtensa/core/ptables.c) maintains a global list, xtensa_domain_list, of active memory domains using a list node embedded inside the caller-owned struct k_mem_domain. When a domain is…
- risk 0.34cvss 6.3epss 0.00
A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a…
- risk 0.34cvss 6.3epss 0.00
An integer underflow in bt_mesh_sol_recv() in the Bluetooth Mesh solicitation handling (subsys/bluetooth/mesh/solicitation.c) leads to an out-of-bounds write. When CONFIG_BT_MESH_OD_PRIV_PROXY_SRV is enabled, the function parses solicitation PDUs from raw BLE advertising…
- risk 0.33cvss 6.1epss 0.00
In Zephyr's experimental USB host stack (CONFIG_USB_HOST_STACK), usbh_device_disconnect() (subsys/usb/host/usbh_device.c) freed the root usb_device slab object without clearing the cached pointer ctx->root. The bus removal handler dev_removed_handler()…
- risk 0.33cvss 6.2epss 0.00
mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool…
- risk 0.33cvss 6.1epss 0.00
The SocketCAN implementation validates the length of a user-provided buffer containing a socketcan_frame object using only a NET_ASSERT statement in zcan_sendto_ctx() before dereferencing it in socketcan_to_can_frame(). In production builds where assertions are disabled, a…
- risk 0.33cvss 6.1epss 0.00
Issuing an ICMP ping via the `net ping` shell command to a device's own IPv4 address causes the network stack to recursively re-enter the input path on the same system work-queue stack. Because the destination is recognized as a local address, both the echo request and the…
- risk 0.33cvss 6.1epss 0.00
Issues in stm32 USB device driver (drivers/usb/device/usb_dc_stm32.c) can lead to an infinite while loop.
- risk 0.33cvss 5.1epss 0.01
In the Zephyr project Bluetooth subsystem, certain duplicate and back-to-back packets can cause incorrect behavior, resulting in a denial of service. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions.
- risk 0.32cvss 4.9epss 0.00
The Zephyr ext2 filesystem driver (subsys/fs/ext2) trusted the on-disk directory entry fields de_rec_len and de_name_len when walking a directory block. ext2_fetch_direntry() guarded only with de_name_len > EXT2_MAX_FILE_NAME, but de_name_len is a uint8_t and EXT2_MAX_FILE_NAME…
- risk 0.32cvss 4.9epss 0.00
Stack based buffer overflow in le_ecred_conn_req(). Zephyr versions >= v2.5.0 Stack-based Buffer Overflow (CWE-121). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-8w87-6rfp-cfrm
- risk 0.31cvss 5.9epss 0.00
The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr()…
- risk 0.31cvss 5.9epss 0.00
parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with…
- risk 0.31cvss 5.8epss 0.00
A use-after-free exists in the Zephyr second-generation work queue (kernel/work.c) in the handling of delayable work timeouts. When a delayable work item's timeout has been dequeued and its handler work_timeout() is in flight (blocked acquiring the work-queue spinlock), a…
- risk 0.31cvss 5.9epss 0.00
The Realtek BEE Bluetooth HCI driver's send callback, bt_hci_bee_send() in drivers/bluetooth/hci/hci_bee.c, violated the bt_hci_driver_api buffer-ownership contract. That contract requires the driver to consume (unref) the transmit net_buf only on success; on an error return the…
- risk 0.31cvss 5.9epss 0.00
The Bluetooth HCI driver for Bouffalo Lab on-chip BLE controllers (BL60x/BL70x/BL61x), bt_bflb_send() in drivers/bluetooth/hci/hci_bflb.c, violates the bt_hci_driver_api.send() buffer-ownership contract. That contract (documented at include/zephyr/drivers/bluetooth.h) requires…
- risk 0.31cvss 5.8epss 0.01
Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path…
- risk 0.31cvss 5.9epss 0.00
subsys/net/ip/icmpv6.c reads the network interface from a net_pkt after that packet has been handed to net_try_send_data(). In icmpv6_handle_echo_request() and net_icmpv6_send_error(), the post-send statistics update calls net_pkt_iface(reply)/net_pkt_iface(pkt) on the just-sent…
Page 9 of 13