Nxp

On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by observing CPU registers and the effect of code/instruction execution.

The Bluetooth Low Energy implementation on NXP SDK through 2.2.1 for KW41Z devices does not properly restrict the Link Layer payload length, allowing attackers in radio range to cause a buffer overflow via a crafted packet.

NXP LPC55S66JBD64, LPC55S66JBD100, LPC55S66JEV98, LPC55S69JBD64, LPC55S69JBD100, and LPC55S69JEV98 microcontrollers (ROM version 1B) have a buffer overflow in parsing SB2 updates before the signature is verified. This can allow an attacker to achieve non-persistent code…

NXP MCUXpresso SDK v2.7.0 was discovered to contain a buffer overflow in the function USB_HostParseDeviceConfigurationDescriptor().

NXP MCUXpresso SDK v2.7.0 was discovered to contain a buffer overflow in the function USB_HostProcessCallback().

NXP MCUXpresso SDK versions prior to 2.8.2 are vulnerable to integer overflow in SDK_Malloc function, which could allow to access memory locations outside the bounds of a specified array, leading to unexpected behavior such segmentation fault when assigning a particular block of…

NXP MQX Versions 5.1 and prior are vulnerable to integer overflow in mem_alloc, _lwmem_alloc and _partition functions. This unverified memory assignment can lead to arbitrary memory allocation, resulting in unexpected behavior such as a crash or a remote code injection/execution.

A software vulnerability has been identified in the U-Boot Secondary Program Loader (SPL) before 2023.07 on select NXP i.MX 8M family processors. Under certain conditions, a crafted Flattened Image Tree (FIT) format structure can be used to overwrite SPL memory, allowing…

The OPTEE-OS CSU driver for NXP i.MX SoC devices lacks security access configuration for several models, resulting in TrustZone bypass because the NonSecure World can perform arbitrary memory read/write operations on Secure World memory. This involves a DMA capable peripheral.

NXP LPC55S6x microcontrollers (0A and 1B), i.MX RT500 (silicon rev B1 and B2), i.MX RT600 (silicon rev A0, B0), LPC55S6x, LPC55S2x, LPC552x (silicon rev 0A, 1B), LPC55S1x, LPC551x (silicon rev 0A) and LPC55S0x, LPC550x (silicon rev 0A) include an undocumented ROM patch…

In the NXP NFC firmware, there is a possible insecure firmware update due to a logic error. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid…

On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by leveraging a load instruction inside the execute-only region to expose the protected code into a CPU register.

The Bluetooth Low Energy (BLE) stack implementation on the NXP KW41Z (based on the MCUXpresso SDK with Bluetooth Low Energy Driver 2.2.1 and earlier) does not properly restrict the BLE Link Layer header and executes certain memory contents upon receiving a packet with a Link…

A stack-based buffer overflow issue was discovered in NXP i.MX 50, i.MX 53, i.MX 6ULL, i.MX 6UltraLite, i.MX 6SoloLite, i.MX 6Solo, i.MX 6DualLite, i.MX 6SoloX, i.MX 6Dual, i.MX 6Quad, i.MX 6DualPlus, i.MX 6QuadPlus, Vybrid VF3xx, Vybrid VF5xx, and Vybrid VF6xx. When the device…

NXP Kinetis K82 devices have a buffer over-read via a crafted wlength value in a GET Status-Other request during use of USB In-System Programming (ISP) mode. This discloses protected flash memory.

NXP LPC55S69 devices before A3 have a buffer over-read via a crafted wlength value in a GET Descriptor Configuration request during use of USB In-System Programming (ISP) mode. This discloses protected flash memory.

The NXP Data Co-Processor (DCP) is a built-in hardware module for specific NXP SoCs¹ that implements a dedicated AES cryptographic engine for encryption/decryption operations. The dcp_tool reference implementation included in the repository selected the test key, regardless of…

An improper certificate validation issue was discovered in NXP i.MX 28 i.MX 50, i.MX 53, i.MX 7Solo i.MX 7Dual Vybrid VF3xx, Vybrid VF5xx, Vybrid VF6xx, i.MX 6ULL, i.MX 6UltraLite, i.MX 6SoloLite, i.MX 6Solo, i.MX 6DualLite, i.MX 6SoloX, i.MX 6Dual, i.MX 6Quad, i.MX 6DualPlus,…

NXP moal.ko Wi-Fi driver 5.1.7.10 FW version from v17.92.1.p149.43 To v17.92.1.p149.157 was discovered to contain a buffer overflow via the mod_para parameter in the woal_init_module_param function.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Clear table_sz when rproc_shutdown There is case as below could trigger kernel dump: Use U-Boot to start remote processor(rproc) with resource table published to a fixed address by rproc.…

An information-disclosure vulnerability exists on select NXP devices when configured in Serial Download Protocol (SDP) mode: i.MX RT 1010, i.MX RT 1015, i.MX RT 1020, i.MX RT 1050, i.MX RT 1060, i.MX 6 Family, i.MX 7Dual/Solo, i.MX 7ULP, i.MX 8M Quad, i.MX 8M Mini, and Vybrid.…

The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only…

On NXP MIFARE Ultralight and NTAG cards, an attacker can interrupt a write operation (aka conduct a "tear off" attack) over RFID to bypass a Monotonic Counter protection mechanism. The impact depends on how the anti tear-off feature is used in specific applications such as…

An electromagnetic-wave side-channel issue was discovered on NXP SmartMX / P5x security microcontrollers and A7x secure authentication microcontrollers, with CryptoLib through v2.9. It allows attackers to extract the ECDSA private key after extensive physical access (and…

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: Fix i.MX8MP VC8000E power up sequence Per errata[1]: ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX power up/down cycling. Description: VC8000E reset de-assertion edge…

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.9.0 and prior to version 4.11.0, the RSA-OAEP decryption implementation in the NXP CAAM crypto…