Linux
by Linux
Source repositories
CVEs (14)
| CVE | Sev | Risk | CVSS | EPSS | KEV | Published | Description |
|---|---|---|---|---|---|---|---|
| CVE-2026-43332 | Hig | 0.51 | 7.8 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path. | |
| CVE-2026-43329 | Hig | 0.51 | 7.8 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | |
| CVE-2026-43405 | Hig | 0.49 | 7.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL. | |
| CVE-2026-43371 | Med | 0.36 | 5.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', `macb_tx_poll()` incorrectly assumes there are no packets to handle because `queue->tx_head == queue->tx_tail`. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to `queue->tx_head` and `queue->tx_tail` are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm | |
| CVE-2026-43364 | Med | 0.36 | 5.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: ublk: fix NULL pointer dereference in ublk_ctrl_set_size() ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via set_capacity_and_notify() without checking if it is NULL. ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs (ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE handler performs no state validation, a user can trigger a NULL pointer dereference by sending UPDATE_SIZE to a device that has been added but not yet started, or one that has been stopped. Fix this by checking ub->ub_disk under ub->mutex before dereferencing it, and returning -ENODEV if the disk is not available. | |
| CVE-2026-43356 | Med | 0.36 | 5.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis: Fix NULL pointer dereference in adis_init The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case. | |
| CVE-2026-43344 | Med | 0.36 | 5.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled. | |
| CVE-2026-43343 | Med | 0.36 | 5.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup. | |
| CVE-2026-43316 | Med | 0.36 | 5.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added at all since everything is known to be within bounds. Additionally use an unsigned value for the shift to remove the instrumentation even without the explicit bounds checking. [hverkuil: fix checkpatch warning for is_tw286x] | |
| CVE-2026-43342 | Med | 0.31 | 4.7 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection. | |
| CVE-2024-39286 | Low | 0.21 | 3.3 | 0.00 | Feb 12, 2025 | Incorrect execution-assigned permissions in the Linux kernel mode driver for the Intel(R) 800 Series Ethernet Driver before version 1.15.4 may allow an authenticated user to potentially enable information disclosure via local access. | |
| CVE-2026-43482 | 0.00 | — | 0.00 | May 13, 2026 | In the Linux kernel, the following vulnerability has been resolved: sched_ext: Disable preemption between scx_claim_exit() and kicking helper work scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from triggering further error handling. After claiming exit, the caller must kick the helper kthread work which initiates bypass mode and teardown. If the calling task gets preempted between claiming exit and kicking the helper work, and the BPF scheduler fails to schedule it back (since error handling is now disabled), the helper work is never queued, bypass mode never activates, tasks stop being dispatched, and the system wedges. Disable preemption across scx_claim_exit() and the subsequent work kicking in all callers - scx_disable() and scx_vexit(). Add lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the requirement. | ||
| CVE-2026-43429 | 0.00 | — | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely. | ||
| CVE-2026-43410 | 0.00 | — | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled When the Remote System Update (RSU) isn't enabled in the First Stage Boot Loader (FSBL), the driver encounters a NULL pointer dereference when excute svc_normal_to_secure_thread() thread, resulting in a kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ... Data abort info: ... [0000000000000008] user address but active_mm is swapper Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT Hardware name: SoCFPGA Stratix 10 SoCDK (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : svc_normal_to_secure_thread+0x38c/0x990 lr : svc_normal_to_secure_thread+0x144/0x990 ... Call trace: svc_normal_to_secure_thread+0x38c/0x990 (P) kthread+0x150/0x210 ret_from_fork+0x10/0x20 Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402) ---[ end trace 0000000000000000 ]--- The issue occurs because rsu_send_async_msg() fails when RSU is not enabled in firmware, causing the channel to be freed via stratix10_svc_free_channel(). However, the probe function continues execution and registers svc_normal_to_secure_thread(), which subsequently attempts to access the already-freed channel, triggering the NULL pointer dereference. Fix this by properly cleaning up the async client and returning early on failure, preventing the thread from being used with an invalid channel. |
- risk 0.51cvss 7.8epss 0.00
In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path.
- risk 0.51cvss 7.8epss 0.00
In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups.
- risk 0.49cvss 7.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL.
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', `macb_tx_poll()` incorrectly assumes there are no packets to handle because `queue->tx_head == queue->tx_tail`. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to `queue->tx_head` and `queue->tx_tail` are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: ublk: fix NULL pointer dereference in ublk_ctrl_set_size() ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via set_capacity_and_notify() without checking if it is NULL. ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs (ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE handler performs no state validation, a user can trigger a NULL pointer dereference by sending UPDATE_SIZE to a device that has been added but not yet started, or one that has been stopped. Fix this by checking ub->ub_disk under ub->mutex before dereferencing it, and returning -ENODEV if the disk is not available.
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis: Fix NULL pointer dereference in adis_init The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case.
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled.
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup.
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added at all since everything is known to be within bounds. Additionally use an unsigned value for the shift to remove the instrumentation even without the explicit bounds checking. [hverkuil: fix checkpatch warning for is_tw286x]
- risk 0.31cvss 4.7epss 0.00
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection.
- risk 0.21cvss 3.3epss 0.00
Incorrect execution-assigned permissions in the Linux kernel mode driver for the Intel(R) 800 Series Ethernet Driver before version 1.15.4 may allow an authenticated user to potentially enable information disclosure via local access.
- CVE-2026-43482May 13, 2026risk 0.00cvss —epss 0.00
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Disable preemption between scx_claim_exit() and kicking helper work scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from triggering further error handling. After claiming exit, the caller must kick the helper kthread work which initiates bypass mode and teardown. If the calling task gets preempted between claiming exit and kicking the helper work, and the BPF scheduler fails to schedule it back (since error handling is now disabled), the helper work is never queued, bypass mode never activates, tasks stop being dispatched, and the system wedges. Disable preemption across scx_claim_exit() and the subsequent work kicking in all callers - scx_disable() and scx_vexit(). Add lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the requirement.
- CVE-2026-43429May 8, 2026risk 0.00cvss —epss 0.00
In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely.
- CVE-2026-43410May 8, 2026risk 0.00cvss —epss 0.00
In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled When the Remote System Update (RSU) isn't enabled in the First Stage Boot Loader (FSBL), the driver encounters a NULL pointer dereference when excute svc_normal_to_secure_thread() thread, resulting in a kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ... Data abort info: ... [0000000000000008] user address but active_mm is swapper Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT Hardware name: SoCFPGA Stratix 10 SoCDK (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : svc_normal_to_secure_thread+0x38c/0x990 lr : svc_normal_to_secure_thread+0x144/0x990 ... Call trace: svc_normal_to_secure_thread+0x38c/0x990 (P) kthread+0x150/0x210 ret_from_fork+0x10/0x20 Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402) ---[ end trace 0000000000000000 ]--- The issue occurs because rsu_send_async_msg() fails when RSU is not enabled in firmware, causing the channel to be freed via stratix10_svc_free_channel(). However, the probe function continues execution and registers svc_normal_to_secure_thread(), which subsequently attempts to access the already-freed channel, triggering the NULL pointer dereference. Fix this by properly cleaning up the async client and returning early on failure, preventing the thread from being used with an invalid channel.