dm
by Linux
CVEs (3)
| CVE | Vendor / Product | Sev | Risk | CVSS | EPSS | KEV | Published | Description |
|---|---|---|---|---|---|---|---|---|
| CVE-2026-43314 | Med | 0.36 | 5.5 | 0.00 | May 8, 2026 | In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-timeout-fail to dm echo 1 >/sys/class/block/dm-0/io-timeout-fail echo 100 >/sys/kernel/debug/fail_io_timeout/probability echo 10 >/sys/kernel/debug/fail_io_timeout/times 3. read/write dm 4. iscsiadm -m node -u Result: hang task like below [ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds. [ 862.244133] Tainted: G E 6.19.0-rc1+ #51 [ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000 [ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi] [ 862.245264] Call Trace: [ 862.245587] [ 862.245814] __schedule+0x810/0x15c0 [ 862.246557] schedule+0x69/0x180 [ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120 [ 862.247688] elevator_change+0x16d/0x460 [ 862.247893] elevator_set_none+0x87/0xf0 [ 862.248798] blk_unregister_queue+0x12e/0x2a0 [ 862.248995] __del_gendisk+0x231/0x7e0 [ 862.250143] del_gendisk+0x12f/0x1d0 [ 862.250339] sd_remove+0x85/0x130 [sd_mod] [ 862.250650] device_release_driver_internal+0x36d/0x530 [ 862.250849] bus_remove_device+0x1dd/0x3f0 [ 862.251042] device_del+0x38a/0x930 [ 862.252095] __scsi_remove_device+0x293/0x360 [ 862.252291] scsi_remove_target+0x486/0x760 [ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi] [ 862.252886] process_one_work+0x633/0xe50 [ 862.253101] worker_thread+0x6df/0xf10 [ 862.253647] kthread+0x36d/0x720 [ 862.254533] ret_from_fork+0x2a6/0x470 [ 862.255852] ret_from_fork_asm+0x1a/0x30 [ 862.256037] Remove the blk_should_fake_timeout() check from dm, as dm has no native timeout handling and should not attempt to fake timeouts. | ||
| CVE-2025-38063 | Med | 0.36 | 5.5 | 0.00 | Jun 18, 2025 | In the Linux kernel, the following vulnerability has been resolved: dm: fix unconditional IO throttle caused by REQ_PREFLUSH When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def2845cc33 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). | ||
| CVE-2023-54324 | 0.00 | — | 0.00 | Dec 30, 2025 | In the Linux kernel, the following vulnerability has been resolved: dm: fix a race condition in retrieve_deps There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access. See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device. |
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-timeout-fail to dm echo 1 >/sys/class/block/dm-0/io-timeout-fail echo 100 >/sys/kernel/debug/fail_io_timeout/probability echo 10 >/sys/kernel/debug/fail_io_timeout/times 3. read/write dm 4. iscsiadm -m node -u Result: hang task like below [ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds. [ 862.244133] Tainted: G E 6.19.0-rc1+ #51 [ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000 [ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi] [ 862.245264] Call Trace: [ 862.245587] [ 862.245814] __schedule+0x810/0x15c0 [ 862.246557] schedule+0x69/0x180 [ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120 [ 862.247688] elevator_change+0x16d/0x460 [ 862.247893] elevator_set_none+0x87/0xf0 [ 862.248798] blk_unregister_queue+0x12e/0x2a0 [ 862.248995] __del_gendisk+0x231/0x7e0 [ 862.250143] del_gendisk+0x12f/0x1d0 [ 862.250339] sd_remove+0x85/0x130 [sd_mod] [ 862.250650] device_release_driver_internal+0x36d/0x530 [ 862.250849] bus_remove_device+0x1dd/0x3f0 [ 862.251042] device_del+0x38a/0x930 [ 862.252095] __scsi_remove_device+0x293/0x360 [ 862.252291] scsi_remove_target+0x486/0x760 [ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi] [ 862.252886] process_one_work+0x633/0xe50 [ 862.253101] worker_thread+0x6df/0xf10 [ 862.253647] kthread+0x36d/0x720 [ 862.254533] ret_from_fork+0x2a6/0x470 [ 862.255852] ret_from_fork_asm+0x1a/0x30 [ 862.256037] Remove the blk_should_fake_timeout() check from dm, as dm has no native timeout handling and should not attempt to fake timeouts.
- risk 0.36cvss 5.5epss 0.00
In the Linux kernel, the following vulnerability has been resolved: dm: fix unconditional IO throttle caused by REQ_PREFLUSH When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def2845cc33 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait().
- CVE-2023-54324Dec 30, 2025risk 0.00cvss —epss 0.00
In the Linux kernel, the following vulnerability has been resolved: dm: fix a race condition in retrieve_deps There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access. See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device.